| Customization: | Available |
|---|---|
| Certification: | GS, CE, RoHS, ISO 9001 |
| Usage: | Woodworking, Metal, Plastic, Glass, Stone, Rubber, Advertising, Mould |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| model | 2030 | |||
| Attribute | T-D300 3axis | T-D300 4axis | Z-D300 3axis | Z-D300 4axis |
| axis | 3axis | 4axis | 3axis | 4axis |
| Interface | LPT port | LPT port | LPT port | LPT port |
| Limit switch | no | no | no | no |
| Tool auto-checking | no | no | no | no |
| Spindle Motor: | 300W | 300W | 300W | 300W |
| Type of screw | 1404 Trapezoidal Screw |
1404 Trapezoidal Screw |
1605 Ball screw |
1605 Ball screw |
| Weigh | 25kg | 29kd | 26kg | 30kg |
| Machine Dimensions: | 560X450X450mm | |||
| Rack material: | 6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.) |
|||
| Engraving area: | 300X200mm | |||
| Z-Axis Stroke: | 60mm, Engraving depth depends on the length of the tool edge | |||
| Acceptable materialthickness: | ≤60mm | |||
| Rail type: | Chromeplate shaft + Linear Bearings, Surface hardening 61HRC | |||
| Spindle motor: | 300W/12000r/min (Very small noise) | |||
| Collet type: | ER11,1/8"(3.175mm) Collet | |||
| Stepper motor and drive: | two-phase hybrid stepping motor 3A/PHASE,150N.cm, 8 segments drive. | |||
| Maximum operating speed: | 4000mm/min (Engraving speed :300-3000mm/min) | |||
| Software Compatability: | Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam) | |||
| Command code: | G code/.nc/.ncc/.tab/.txt | |||
| Deceleration ratio: 4:1 Description: |
Chuck Size: 50mm self-centering chuck Center height: H = 51mm Clamping diameter: 50mm or less Deceleration mode: synchronous wheel / belt Stepper motor:NEW 57 type / 3A Stepper Drive: T65-axis drive Positioning accuracy: 0.075 ° Weight: 4kg |
|||
){kind=link}